Setting Up The Cradle; Connecting The Tablet Pc To The Cradle - Fujitsu STYLISTIC Q704 Operating Manual

Setting up the cradle

Select a suitable location for the cradle before setting it up. In doing
so, please follow these instructions:
• Place the cradle on a flat, stable, non-slippery surface.
• Never place the cradle or the AC adapter on a heat-sensitive surface.
• Do not expose the cradle to extreme environmental conditions.
Protect the cradle from dust, moisture and heat.

Connecting the Tablet PC to the cradle

It is possible to connect the Tablet PC to the cradle while it is running. To prevent
problems, we recommend that you switch the Tablet PC off first.
Disconnect the AC adapter from the Tablet PC before connecting
the Tablet PC to the cradle.
When the Tablet PC is connected to the cradle, you must connect
the AC adapter to the cradle.
Information for using the performance cradle:
If your Tablet PC is connected to the performance cradle, the micro USB port of
•
the Tablet PC cannot be used. Use the alternative ports of the cradle.
• The HDMI and VGA ports of the performance cradle cannot be used at the same time.
If devices are connected to both ports, only the device at the HDMI port can be used.
• The maximum supported resolution for VGA/HDMI is 1920 x 1080 pixels.
Cradle
► Switch the Tablet PC off.
► Remove the AC plug of the AC adapter from the power outlet.
► Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC.
Fujitsu
Accessories for your Tablet PC (optional)
45