Page 1
Owner’s Manual Instructions for Assembly, Testing, Operation, and Servicing Water Pump Wheel Kit: Outdoor agricultural product used to move North Star water pumps by hand. WARNING READ and UNDERSTAND the Owner’s Manual completely before using this water pump wheel kit.
Table of Contents About Your Water Pump ......................4 Important Safety Information ......................4 During Assembly During Operation Unpacking Unpacking ............................5 Unpacking the Manual Bag ........................... Assembly .................................. Machine Components ........................8 Operation - Using the Water Pump Wheel Kit ..................9 Specifications ..........................9 Wheel Kit Exploded View ......................10 Limited Warranty ........................11...
Thank you for purchasing your North Star Water Pump Wheel Kit! About Your Water Pump Wheel Kit This water pump wheel kit is designed for use with the North Star water pump. It is designed to aid movement, by hand of the water pump unit.
Note that some parts are shipped inside the manual bag. If you have damaged components: Contact the freight company that delivered the unit and file a claim. If you have missing components: Contact North Star Product Support at 1-800-270-0810. Handle & Grip Qty 1 Handle Mount...
Assembly Step 1: Attach wheels and axle brackets Attach axle plates, axle channels and wheels to the right and left side of the frame, as shown in the figure below, using (4) 5/16” x ¾” bolts, (4) 5/16” nuts, (2) 5/8” x 4” bolts, (2) 5/8” Lock washers and (4) 5/8”...
Page 7
Assembly Step 3: Attach handle mount to the frame Attach the handle mount to the frame, as shown in the figure below, using (2) 5/16”-18 x 2” bolts and (2) 5/16”-18 nuts. Position handle mount in center of frame. Using a drill and a 3/8 socket bit lock handle mount into place with (2) 1/4”...
Machine Components Wheel: Pneumatic wheel assembly. Handle: Pivots in the handle mount to move out of the way during nonuse. Handle Mount: Fastens the handle to the frame. Axle Plate: Fastens the axle to the frame. Axle Channel: Fastens the frame to the axle.
The manufacturer reserves the right to make improvements in design and/or changes in specifications at any time without incurring any obligation to install them on units previously sold. Any Questions, Comments, Problems or Parts Orders Call North Star Product Support 1-800-270-0810...
This warranty does not cover any personal injury or damage to surrounding property caused by failure of any part. This warranty is in lieu of any other warranty expressed or implied and North Star assumes no other responsibility or liability outside that expressed within this warranty.
Page 12
Distributed by Northern Tool + Equipment Co., 2800 SouthCross Drive West P.O. Box 1499 Burnsville, MN 55337-0499...
Need help?
Do you have a question about the M109172B and is the answer not in the manual?
Questions and answers