GE APE08 Owner's Manual And Installation Instructions page 11

INSTALL TOP WINDOW GASKET
7
AND WINDOW LOCKING BRACKET
A Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
B
Attach the window locking bracket with
one large wood screw.
Installation Instructions
11
ATTACH EXHAUST HOSE
8
Insert the round end of the exhaust hose
A
into the exhaust adapter in the window
slider and turn it to lock it in place.
Adapter
B • The exhaust hose must be properly
installed to the back of the unit and to
the exhaust adapter, and exhausted to
the outside when using the unit in the
COOL mode by sliding it down in
position.
• Attach the unit end of the exhaust hose
to the back of the air conditioner.
Back of unit
IMPORTANT: To ensure proper
cooling, do not kink, pinch, shorten
or lengthen the exhaust hose. The
minimum length of the exhaust
hose is 20" (50 cm) and the
maximum length of the exhaust
hose is 78" (200 cm).
An excessive number of bends in the
exhaust hose may compromise the
cooling performance.