Page 1
DVD-HDD RECORDER User manual and service information DRH-5700x...
Page 2
21 COMPONENT OUT (picture) 27 ANTENNA OUT Component signal output YPbPr for connecting a component For connecting the antenna input on the television. The an- video cable. tenna signal at socket 16 is redirected to the television via this connection. DRH-5700x...
This unit has been tested and approved with regard to conformity with the basic requirements and other relevant regulations of the EMC Di- rective 2004/108/EC, the Directive on low-voltage devices 2006/95/EC. Included in delivery Targa DRH-5700x, mains cable Remote control incl. batteries Operating instructions HDMI cable Antenna cable...
File manager: See page 35. 4. Press the SOURCE button (40) to select the recording source (PR, AV1, SV1, AV2, SV2, SCART or DV). 5. Press RECORD (6, 55) to start the recording. 6. Press STOP (8, 60) to stop the recording. DRH-5700x...
Tuner menu ............22 Index ............... 58 Disc menu............... 23 Specifications ............59 Playback menu ............25 Recording menu ............. 26 Video menu............. 27 Audio menu ............28 System menu............29 General description of the screen menu ....30 DRH-5700x...
Check the mains cable from time to vibrations; time. Do not use adapter plugs or extension cables that do not correspond to applicable safety stan- dards and do not tamper with power or mains ca- bles! DRH-5700x...
For more detailed information about disposal of your that the cables are of sufficient length and the old appliance, please contact your local council office, connectors are not subject to mechanical load! waste disposal service or the shop where you pur- chased the product. DRH-5700x...
MP3 files Important! WMA files Risk of condensation forming! JPEG files When moving the unit from a cold to a warm place, always allow to acclimatise before us- ing otherwise discs and internal components may be damaged. DRH-5700x...
Playback on DVD+R DL compatible play- ers only (after disc is finalised) • Edited contents (hide, merge chapter, add chapter markers, etc.) can no longer be played on DVD+R DL compatible players. • Titles/chapters can be edited to a lim- ited extent. DRH-5700x...
If a DVD with a different country code to that printed on the unit is played, the message "Incorrect regional code. Playback not possible." appears on the televi- sion screen. DRH-5700x...
Never disconnect the mains plug or use • A faulty disk will no longer play re- the fuse switch to interrupt the power cordings. In this case, the hard disk must supply while the recorder is switched be replaced. DRH-5700x...
Page 12
(contents directory) for the card. 4. Refer to page 38 for a more detailed description on how to operate the reader. Note You can copy files from the USB socket to the jukebox on the hard disk, not onto DVD. DRH-5700x...
For connecting auxiliary equipment (video) to OPEN/CLOSE the S-VIDEO IN 2 and CVBS 2 sockets or audio Opens and closes the disc loader. equipment to AUDIO IN L/R. 10 Disc loader 15 DV IN Insert the disc here. For connecting digital camcorders for playback. DRH-5700x...
Switches on the unit or switches to back information (title, chapter, play standby mode. time, etc.). 43 TIMER Opens and closes the timer menu. 44 VIDEO+ Enter the VideoPlus code to record auto- matically from the TV. 45 JUKEBOX Opens the jukebox on the HDD. DRH-5700x...
For connecting to the antenna input on the tele- SUBWOOFER). vision. The antenna signal at socket 16 is redi- 21 COMPONENT OUT (picture) rected to the television via this socket. Analogue component signal output, YPbPr, for connecting televisions, displays via component video cable. DRH-5700x...
Connect the L and R audio sockets on the recorder to manuals for the television, video recorder, stereo the left and right audio input sockets on the television system or other device. using audio cable (A). (for video, S-video and component sockets). DRH-5700x...
R) Antenna cable signals. Cables not included in the delivery C) Component cable S) S-video cable O) Optical digital audio cable D) DVin cable X) Coaxial digital audio cable (you can also use the video cable (V) instead of this cable). DRH-5700x...
Interface are registered trademarks of HDMI licensing put socket on the amplifier using an optional digital au- LLC. dio cable (OPTICAL O or COAXIAL X). 2. The digital output on the recorder must be activated (see "Sound" on page 28). DRH-5700x...
"DTS" and "DTS Digital Out" are trademarks of Digi- tal Theater Systems, Inc. Other audio/video connections Connecting a PAY TV/Canal Plus decoder Canal Plus decoder Recorder Connect a PAY TV/Canal Plus decoder to the SCART IN/DECODER socket as illustrated. DRH-5700x...
SOURCE button to select SCART (see page 46) and cable. play or record a source signal at the SCART IN/DECODER socket. The recorder does not need to be switched on to play the signals from the tuner connected to the television. DRH-5700x...
When switching on the unit for the first time or after a factory reset, the start-up assistant will help you to set the language, country, time and television channels. Note The automatic time and date setting only works if the station search function has found at least one station. DRH-5700x...
7. Press RETURN or to navigate back to the me- 8. Press SETUP to exit the root menu. 3. Press to select a channel. 4. Press to select the editing option and then press ENTER. DRH-5700x...
Important! All data is deleted when the disc is format- ted. 3. Press to select [OK] and then press ENTER. Disc formatting may take a few minutes. The sys- tem returns to the Setup menu when formatting is complete. DRH-5700x...
Page 24
• You cannot unfinalise DVD-R and DVD+R discs. • Finalising is not possible when the op- tion [Protect] is set to [On]. Set the op- tion [Protect] to [Off] in order to enable finalising. DRH-5700x...
DVD disc (4.7 GB) approx. 8 hours. more information. Note 1. Select [DivX Reg. Code] and press When recordings made in SLP and SEP 2. The code is displayed. Press ENTER to return. mode are played, picture fragments or subti- tles may appear distorted. DRH-5700x...
(23) or transmit from the scart out socket. • [Video] – CVBS (Composite) signal. • [RGB] – High-quality output signal in RGB format. Check whether your television is able to display RGB via a SCART connection before making any changes. DRH-5700x...
PCM sound format. • [Automatic]: Signal digital output configured au- tomatically in line with the audio data on the disc. • [Off] (for DTS): If "Off" is selected, the DTS signal is not transmitted via the DIGITAL AUDIO OUT socket. DRH-5700x...
/ : change the setting at the current cursor posi- 4. The automatic installation assistant for initial setup tion. appears once resetting is complete, see page 21. 3. Press ENTER to confirm. DRH-5700x...
• [Sound (audio)]: Selected language (DVD- VIDEO only) or audio channel. • [….]: Selected subtitles. • [ ]: Repeat function. DRH-5700x...
Page 31
Pause playback and press REW FF several times to play in slow motion. HDD, DVD; 4 speeds Video CD; 3 speeds (forwards only) MENU/PBC The disc menu appears on the screen. SUBTITLE Press SUBTITLE during playback and press to select the desired subtitle language. DRH-5700x...
Page 32
Press AUDIO several times during playback to select the de- sired channel. On DVD-RW discs recorded in VR mode and hard disks with a main channel and an audio channel in two languages, you can select between the main channel (L), auxiliary channel (R) and main/auxiliary channel (L+R). DRH-5700x...
If you make an incorrect entry, press to move the underscore cursor (_) to the incorrect entry and then enter the correct number. 4. Press ENTER to confirm. Playback starts from the selected time on the disc. DRH-5700x...
5. Other functions: Select a file and press ENTER. See "Options in file manager" on page 35. 6. Press STOP to stop playback. The file manager appears. • Press the RETURN button and select the option [DVD] or [HDD] to exit the file manager. DRH-5700x...
Press DISPLAY again to hide the informa- tion. • Press the RETURN button and select the option [DVD] or [HDD] to exit the menu screen. 4. Press STOP to stop playback at any time. DRH-5700x...
Sampling frequency: 8 - 48 kHz (MP3), 32 - 48 kHz (WMA) Bit rate: 8 - 320 kbps (MP3), 32 -192 kbps (WMA) CD-R format: ISO 9660 and JOLIET. DVD±R/RW format: ISO 9660 (UDF bridge format) Maximum number of files/discs: 1999 (total number of files and folders). DRH-5700x...
Page 37
2. Press ENTER to show the options. 3. Select [Delete] and press ENTER. Note: Data stored in the jukebox can only be cop- ied to USB devices. DRH-5700x...
• The disc may take a few minutes to read, de- pending on the size and number of JPEG files. • Press the RETURN button and select the option [DVD] or [HDD] to exit the menu screen. DRH-5700x...
1. Select the file you wish to name in the menu. 2. Press ENTER. The menu options appear in the menu. 3. Select the option [Attribute] and press ENTER. At- tributes such as Title, Artist, Album and Genre are displayed. DRH-5700x...
Page 40
• Alternatively, select an existing personal directory from the overview and press ENTER to confirm. The copying process starts automatically. 7. You can cancel the copying process at any time by pressing the ENTER button. DRH-5700x...
DVD operating mode is selected. Note: Chapter markers are inserted automatically at regular intervals. You can change the fre- quency of these intervals in the [Recording], [Chapter Mark] menus. DRH-5700x...
1. Press the PLAY button to start playback. Playback begins at the point at which you pressed the PAUSE button. The recorder continues recording the current program. DRH-5700x...
Always format blank discs before inserting in the machine for timer recordings. (see "Disc initialisation" on page 23.) Note: Please remember to set the timer recording to start at least 10 minutes early so that all of the program is recorded. DRH-5700x...
Page 44
The PDC/PDC function will only work correctly if you enter the right time and date of the program that you wish to record. Please note that PDC/PDC does not work on every channel. DRH-5700x...
10. Press the POWER button on the remote control to switch the unit to standby mode. Note: The channel map is saved and is therefore only required once for each program. You can change the settings at any time in the "Channel Mapping" setup menu (page 23). DRH-5700x...
• Refer to "Instant timer recording" on page 43 for modify the recording time. information on how to program the recording 5. Press STOP to stop the recording. time. Note: This recorder cannot record from sources that are copy-protected by CopyGuard. Read the copyright information on page 52. DRH-5700x...
4. Select [Play] and press ENTER to confirm. Play- back begins. conds after the recording starts. 5. Press MENU/PBC to open the file manager at any time and select another title. USB: Press the USB button and PLAY to open the file manager. DRH-5700x...
/ / / to display the previous/next page. 4. Press to select an option and then press 3. Press RETURN to exit the title list menu. ENTER. Follow the instructions below to execute the menu command. 5. Press [OK] to confirm. DRH-5700x...
Deleting a title section You can delete a section of the title that you no longer Naming a title require. You can allocate any name to a title. A maximum of 13 characters of the name are shown. DRH-5700x...
Page 50
5. Select the option [Divide] and press ENTER at the end of the first section. To remove the dividing point, select [Divide] at a different point and press ENTER. 6. Select [Cancel] to cancel the process and return to the title list. DRH-5700x...
Page 51
4. Press ENTER to confirm. A padlock symbol ap- pears on the title thumbnail. To unlock a title that has already been locked, select the relevant title and then select [Unprotect]. You can now edit and delete the title again. DRH-5700x...
CPRM. the quality suffering. The speed of the copying proc- ess can also be accelerated. When copying from hard disk to DVD, the copying speed depends on the re- cording mode and the DVD disc used. DRH-5700x...
Page 53
• Repeat this procedure for every other title. • Press ENTER, the menu options are displayed on the left of the screen. 2. Press to select the option [Copy] and press ENTER. The copying menu opens. DRH-5700x...
Auto Clock Setting Automatic time setting Clock Setting Manual time setting Screen Saver Switches the screen saver On, Off Format HDD Deletes all recordings and data on the hard disk Load Default Resets the unit settings to the factory default DRH-5700x...
The camcorder picture con- The input source is configured incorrectly Press AV/INPUT and select an input nected to the recorder via the on the recorder. channel (AV1, AV2, DV, etc.) A/V or DV IN input is not dis- played correctly. DRH-5700x...
Page 57
Remote control is too far away from the re- Use the remote control within a range of 7 m. corder. There is an obstacle between the remote con- Remove the obstacle. trol and the recorder. The remote control batteries are flat. Replace the batteries with new ones. DRH-5700x...
V. 1.3, 19-pin (HDMI standard, type A) COAXIAL DIGITAL AUDIO OUT 0.5 V (p-p), 75 ohms, cinch socket x 1 OPTICAL DIGITAL AUDIO OUT Optical connection x 1 ANALOGUE AUDIO OUT 2.0 Vrms (1 kHz, 0 dB), 600 ohms DRH-5700x...
Page 61
TARGA GmbH Lange Wende 41 D-59494 Soest www.targa-online.com...