Kodak i5800 Accessory Manual page 2

7. Open the locking tabs on the side guides of the
manual feed shelf.
8. Adjust the side guides to the desired position
by sliding them in or out to accommodate the
size of the document(s) you are scanning.
9. Close the locking tabs on the side guides of the
manual feed shelf.
10. Open your scanning application and set the
scanner's input elevator in the highest position
(i.e., Document Feeder).
11. Scan the document(s) in single-sheet or hand-
held position.
Removing the manual feed shelf
1. Lower the input elevator to the lowest position.
2. Unlock the locking tabs on the side guides of
the manual feed shelf.
3. Remove the manual feed shelf side guides.
4. Open the scanner cover.
5. Remove the manual feed shelf.
© Kodak, 2011. All rights reserved.
Eastman Kodak Company
343 State Street
Rochester, NY 14650 U.S.A.
TM: Kodak