Table of Contents
Advertisement
Follow these steps to set the Button Lock function:
1. Switch on the appliance.
2. Set a washing program.
3. Start the washing program.
4. Press Button Lock for approximately 5 seconds, or
until the Button Lock indicator light flashes.
5. Button Lock indicator light flashes for approximate-
ly 15 seconds.
6. When Button Lock function is active the indicator
light is on with a static light.
If you press a button while Button Lock function is on,
the digital display shows CL to inform you that the but-
tons are locked.
At the end of a washing program the Button Lock func-
tion is deactivated by opening and closing the door or
switching off the appliance.
Important! It is not possible to deactivate the Button
Lock function while a washing program is in progress.
To do this you must cancel the set program. Refer to
'Select and start a washing program'.
Delay start button
Use the delay start button to delay the start of the
washing program with an interval between 1 and 19
hours. Refer to 'Select and start a washing program'.
Digital display
The display shows:
• program duration,
• remaining time to the end of the program,
• end of a washing program,
• number of hours in delay start,
• fault codes,
• Button Lock function. The digital display shows CL
when this function is active.
Setting mode
The appliance is in setting mode when all the program
indicator lights are on.
The appliance must be in setting mode to set a washing
program.
If a program indicator light is on, cancel the program to
go back to the setting mode. Refer to 'Select and start
a washing program'.
5
Hide quick links:
Advertisement
Table of Contents
