Page 1
XR-M801 RX-LM801 FD-LM801 • This Service Manual contains the additional information “DISASSEMBLY INSTRUCTIONS” and “TEST MODE” for the model XR-M800/M801 (K,EZ). If requiring the other information, see Service Manual of XR-M800/801 (K,EZ), (S/M Code No. 09-00B-437-1R1). S/M Code No. 09-00B-437-1S1...
Page 2
DISASSEMBLY INSTRUCTIONS <FD-LM800/LM801> 1. Removing the Ornament Parts Remove the two screws. Remove the two screws. Remove the eight screws 1 and remove the PANEL, REAR. Remove the FFC from the connector 1 and remove PANEL, TOP 2.
Page 3
2. Removing the CD Block 1) Remove the two screws and remove the entire CD block. 2) The figure shows the status after the CD block is removed. 3. Removing the DECK Block 1) Remove the screw. 2) Remove the screw.
Page 4
Remove the four screws 1, remove the FRONT block 2 and remove the DECK block. The figure shows the status after the DECK block is removed.
CD TEST MODE 1. How to Start the CD Test Mode 2. How to Exit the CD Test Mode While pressing the function button, insert the AC plug to the Disconnect the AC plug. wall outlet. All the indicators on the display light, which means that the test mode starts up.
Page 6
2–11, IKENOHATA 1–CHOME, TAITO-KU, TOKYO 110, JAPAN TEL:03 (3827) 3111 9301978 0251431 Printed in Singapore...