Sharp AR-M355N Quick Reference Manual page 14

Simulation List (Main/Sub) (cont'd)
66 15 Used to set the make time in the FAX pulse dial mode (20pps) and to test the dial signal output. (The dial number signal set by SIM 66-
13 is outputted.) The send level can be set to an optional level. Used to check troubles in dialing and to check the operation. (Only
when FAX is installed.)
16 Used to check the dial signal (DTMF) output in the FAX tone dial mode. (The dial number signal set by SIM 66-13 is outputted. The
send level can be set to an optional level. Used to check troubles in dialing and to check the operation. (Only when FAX is installed.)
17 Used to check the dial signal (DTMF) output in the FAX tone dial mode. Send level: Max. Used to check the operation. (Only when
FAX is installed.)
18 Used to check the dial signal (DTMF) output in the FAX tone dial mode. An output is sent at the send level set by the soft switch. Used
to check the operation. (Only when FAX is installed.)
19 Used to back-up the HDD data into the Flash memory (optional FAX expansion memory: AR-MM9). (Only when FAX is installed.)
20 Used to read the back-up data by SIM 66-19 to the SRAM/HDD. (Only when FAX is installed.)
21 Used to print information related to FAX (various registrations, communication management, file management, system error protocol).
(Only when FAX is installed.)
22 Used to adjust the handset volume. (Only when the FAX is installed.)
23 Used to download the FAX program. (Only when FAX is installed.) Not used in the market. (For development.)
24 Used to clear the FAST memory data. (Only when FAX is installed.)
25 Used to register the FAX number for Model dial-in. (Only when FAX is installed.) Not used in the market. (For development.)
Quick Reference Guide: AR-M355N/M455N
Simulation List (Pg. 9 of 10)
14