Operation Panel - Sharp AR-M355N Quick Reference Manual

Digital multifunctional imager
Hide thumbs Also See for AR-M355N:
Table of Contents

Advertisement

Operation Panel

When the machine is booted by the diag mode, each operation is performed with the hard
keys of the scanner. The window display is made by the LCD panel. The keys used in the
diag mode are assigned as follows:
START key
Document filing key
FAX/Image send key
Job status key
Clear key
Troubleshooting "Result:NG"
If a "Result:NG" is displayed, check for the following possible causes.
Event: The Write Protect DIP switch setting is incorrect.
Action: Make sure that the Write Protect switch of the Controller PWB is not set to the
release side (down).
Note: Data cannot be written to the ROM if the Write Protect switch is not set to Release
(down). Set the DIP switch properly and retry updating.
Event: The FAX cable is not connected. (The FAX is NG.) Writing cannot occur.
Action: Connect the cable properly and retry writing.
Quick Reference Guide: AR-M355N/M455N
OK key
Up/Down select key
Up/Down select key
Menu key
BACK key
Operation Panel and Troubleshooting "Result:NG"
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ar-ar-m355nAr-m335nAr-m445nAr-m455n

Table of Contents