Kenwood NEXEDGE NX-240 Instruction Manual page 26

■ 2-Tone
2-tone Signaling opens the squelch only when your
transceiver receives a call containing matching 2 tones.
■ FleetSync
Utilizing JVC KENWOOD's FleetSync digital signaling
protocol, this transceiver has PTT ID and Selective
Calling capabilities for managed dispatch operations. For
hazardous/hostile duty environments, the Side1 or Side 2
key can be programmed for Emergency status to alert the
dispatcher and/or operator in distress.
■ MDC-1200
The following features are available with the built-in MDC
signaling: PTT ID Encode, Emergency Encode, Stun/Revive
Decode, and Radio Check Decode.
Note: The transceiver cannot decode MDC-1200 if the
FleetSync baud rate is 2400 bps.
COMPANDER
If programmed by your dealer for a channel, the compander will
remove excessive noise from transmitted signals, to provide
higher clarity of signals.
Note: The compander is used only in analog operation.
VOICE ANNUNCIATION
If enabled by your dealer, when changing the zone and
channel, an audio voice will announce the new zone and
channel number.
18