Basic Operation - Sylvania SDVD8716D User Manual

Connecting with external Speaker
The unit can be connected with external speaker.Please see the following illustration.
AV OUT
VIDEO IN
TV
Center speaker
Left front speaker
SUBWOOFER
Left rear speaker
Note:
There is no 5.1 channel in the unit, however,after connecting to APM it is available to
output audio in 5.1 channel.
DC OUT
AV CABLE
Not supplied
AUDIO IN
AMPLIFIER
Right front speaker
Right rear speaker
10

Basic Operation

Playing disc of DVD,CD,MP3
DVD CD MP3
1.Connect the unit to the power;
2.Open the unit and adjust the monitor to the best position for viewing.
3.Turn on the unit by sliding the ON/OFF switch to ON.
4.Open the disc door and insert a disc into the door with the label side facing up.
5.Close the disc door. The unit will load the disc and start playing.
6.During playback,press[ ] to pause;press it again to resume playback.
7.When playing disc of DVD,CD,Press[
repeatedly, the unit will play at 2,4,8,16,32 times of speed.press[
search backward. Press it repeatedly,the unit will play at 2,4,8,16,32 times of speed
8.Press[ ] once to stop playback; then press[
point where you stopped; press[ ] twice to stop playback completely.
9.When the playing is finished, please turn off the power by sliding ON/OFF switch
to OFF.
Virtual Remote Operation
1.Press "FUNCTION " button when disc is playing, you will see a virtual
remote control as below, and the playback will be paused.
2.The virtual key is shown on
the left of the menu, and the
current playback status is
displayed on the right.
3.Use the / / / button to
choose the icon, when the icon
is selected, you can see the
description at the bottom.
4.Press OK button, the selected virtual key will be activated, "OK=Selected
function" icon will be shown at top left for 10 seconds, in these 10 seconds
you just need to press OK button to change the style of the function. If the
icon disappear, the OK key will not work. (For Search, Return, Mute, the
icon won't be shown).
5.You can also press "FUNCTION" button to close virtual remote menu
without any operation. The player will resume playing after the menu exit.
Note:
1.When the disc is in the submenu, press the function key can go back the
title menu.
2.Stop or no disc state, the "FUNCTION" is invalid.
] ,the unit will search forward. Press it
],the unit will
] to resume playback from the
SRH M
ZOOM Subtitle Off
Repeat Off Mute Off
TT
ADO SUB
Angle Mark Null
OSD
SLOW
ANGLE
SEARCH
11