Basic Operation - Sylvania SDVD1048 User Manual

The Use of Remote Control
Please put the battery into the remote control as per below illustration.
1
CR2025
When using remote control,make sure the infrared window is pointed to infrared receiving
window of the machine.The distance between machine and remote control must be within
3 metres.Please refer to the following illustration.
Note:
1. To avoid falling off or place near damp environment.
2. To avoid infrared receiving window of the unit being under direct sunlight.
3. Please use a new battery to replace old one if the remote control doesn't work.
2
CR2025
MODE
8

Basic Operation

DVD
MPEG4
SVCD VCD CD
Playing disc of DVD, MPEG4, SVCD, VCD, CD, Mp3.
1. In the Source Mode,you can press "
source you want.
DVD
2. Open the disc door and insert a disc into the door with the label side facing up.
3. Close the disc door.The unit will load the disc and start playing.
4. Press" "once to stop playback;then press"
where you stoped;press" "twice to stop playback completely).
5. During playback,press" "to pause; press it again to resume playback.
6. When the playing is finished, please turn off the power by sliding ON/OFF switch to OFF.
7. For some DVD disc with Title or Chapter menu, press"MENU"button to enter menu
page, and use" "to select. Press ENTER to confirm.
Note:
Please do not disconnect USB devices or plug out SD/MMC cards while they are working
with the unit.Functional failure may occur in case of wrong operations.
Play/pause
MP3
" " , " ,to select and "ENTER" key to enter the
SD USB
"to resume playback from the point
Title
Cursor button
ENTER
9
Menu