Table of Contents
Advertisement
Hard drive
✎
The hard drive spare part kit includes a left and right hard drive bracket, Mylar sleeve, connector, and
four isolators.
Description
500-GB, 5400-rpm
400-GB, 5400-rpm
320-GB, 7200-rpm
320-GB, 5400-rpm
250-GB, 5400-rpm
160-GB, 7200-rpm
160-GB, 5400-rpm
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the hard drive:
1. Loosen the four Phillips PM2.5×6.0 captive screws 1 that secure the hard drive cover to the computer.
2. Lift the rear edge of the hard drive cover 2, swing it up and forward, and then remove the cover 3. The hard
drive cover is included in the Plastics Kit, spare part number 496477-001.
Removal and replacement procedures
"Battery" on page
4-8).
Spare part number
498071-001
498072-001
505857-001
498069-001
505856-001
498068-001
498070-001
4–1 1
Advertisement
Table of Contents
