Kenwood DNX891HD Instruction Manual page 110

Speaker location setup
1
In the Car Type screen, touch [Location].
Speaker Location screen appears.
2
Select the speaker locations using [3].
Front Speaker
Select the location from "Door"/ "On Dash"/
"Under Dash".
Rear Speaker
Select the location from "Door"/ "Rear Deck",
"2nd Row"/ "3rd Row" (Minivan, Minivan
(Long)).
DSP select
You can select whether using DSP (Digital
Signal Processor) System.
1
Touch [Bypass] or [Through] of [DSP
Select] in the Audio SETUP screen.
Bypass
There is no effect by DSP.
Through
There is an effect by DSP.
NOTE
• When the mode is set to [Bypass], DSP System
cannot be adjusted.
Return to the Top page
Controlling Audio
109