Step 8 (Check/Replace Motor Brushes) - Sunrise Medical Quickie S-11 Service Manual

Quickie s-11
Hide thumbs Also See for Quickie S-11:
Table of Contents

Advertisement

Disassembly/Reassembly, and Adjustment (cont)
Step 8 - Check / Replace Motor Brushes
Disassembly
Access to Motor Brushes
a. For quick access to Motor Brushes, perform steps 6b of
this section.
b. Use a flat blade screwdriver to remove the
motor brush cap and then remove the brushes for inspec-
tion.
(figure A4.21).
c. Inspect Motor brushes for excessive wear, uneven wear,
and/or severe discoloration.
d. If any of these conditions exist, replace/install both
brushes for the motor in question.
A4.21
Hint: Make sure that the brushes are seated properly
before re-installing the brush caps.
Reassembly
a. Reassemble your S11, by performing the Reverse of
steps 6b.
SUNRISE MEDICAL
QUICKIE S-11 SERVICE MANUAL
2005
PAGE 17

Advertisement

Table of Contents
loading

Table of Contents