Kenwood DDX7025BT Instruction Manual page 40

SETTINGS
S e t t n i g h t e p s e a k e s r — p s
❏
crossover frequency
1
Display the <Speaker Select> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
2
Select the speaker type (front speakers,
rear speakers, or subwoofer).
3
Select the size of the selected speaker.
40
e a k r e i s e z a n d 4
Adjust the crossover frequency of the
selected speaker.
<Gain>
<HPF Freq> Adjusts the crossover frequency
<LPF Freq> Adjusts the crossover for the
<Slope>
<Phase>
* 1 Appears only when the front or rear speakers are selected.
* Appears only when the subwoofer is selected.
2
Adjusts the output volume of
the selected speaker.
for the front or rear speakers
(high pass lter).*
1
subwoofer (low pass lter).* 2
Adjusts the crossover slope.
Selects the phase for the
subwoofer.*
2
S e t t n i g h t e s i l e t n n i g p s o
❏
You can adjust the sound e ects according to your
listening position.
1
Display the <Position> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
2
Select the listening position ([All],
, [Front R] or [Front All]).
t i o i n