Hard Disk Drive; Hardware Installation - HP HB4 User Manual

hard disk drive

Symptom
PC seems to be locked up
and not responding.
Hard disk drive error
message displays.

hardware installation

Symptom
A new device is not
recognized as part of the
system.
78
user's guide
Problem
Program in use has stopped
responding to commands.
Part of hard disk drive has
failed or is about to fail.
Problem
Device driver is not
installed.
Device connector is not
seated or connected
properly.
Cable(s) of new external
device are loose, or power
cables are unplugged.
Power switch of new device
is not turned on.
When the system advised
you of changes to the
configuration, you did not
accept them.
A Plug and Play card may
not automatically configure
when added if the default
configuration conflicts with
other devices.
Solution
Use the Windows Task Manager to close any programs not
responding or to Restart the PC:
1
Press the Ctrl, Alt, and Del keys on the keyboard at the
same time.
2
Select the program that is not responding, and click
End Task.
Or
Click Shut Down, and then click Restart.
If this does not work, press the On button for 4 or more
seconds to turn off the PC. Then, press the On button.
Press the Help ? button on the keyboard to open the Help &
Support Center, or refer to the Warranty & Support Guide
to contact Support for replacement details.
Solution
Install the device driver from the CD or diskette provided
with the device, or download and install the driver from the
device manufacturer's Web site.
You may need an updated driver for Windows XP. Contact
the device vendor directly for an update.
For HP peripherals, visit the HP Web site. Refer to the
Warranty & Support Guide for details.
Ensure that the device is properly and securely connected
and that the pins in the connector are not bent down.
Ensure that all cables are properly and securely connected
and that the pins in the cable or connector are not bent.
Turn off the PC, turn on the external device, and then turn
on the PC to integrate the device with the PC system.
Restart the PC, and follow the instructions for accepting the
changes.
Deselect the automatic settings in the operating system for
the card, and choose a basic configuration that doesn't
cause a resource conflict.
You can also reconfigure or disable devices to resolve the
resource conflict.