Application Recovery - HP HB4 User Manual

to start system restore:
1 Close all open programs.
2 Click the Start button.
3 Choose All Programs.
4 Choose Accessories.
5 Choose System Tools.
6 Click System Restore.
Follow the onscreen instructions.

application recovery

Not all models include the Application Recovery program. Perform steps 3
NOTE:
through 5 of the following procedure. If HP Application Recovery appears in the
folder, your PC includes the program.
If an individual factory-installed application or driver accidentally gets erased or
damaged, you can reinstall the software using the HP Application Recovery
program (select models).
Do not use the Application Recovery program to reinstall software
NOTE:
programs that came on CDs or DVDs included in the PC box. Reinstall these
programs directly from the CDs or DVDs.
to start application recovery:
1 Close all applications and folders.
2 Uninstall the existing (damaged) application; see "uninstalling programs" on
page 71.
3 Click Start on the taskbar.
4 Choose All Programs.
5 Choose PC Help & Tools.
6 Click HP Application Recovery, and then click Yes.
7 Click Application Installation or Driver Installation, and then click
Next.
8 Select the driver or application program to install, and then click Install.
9 Follow the onscreen instructions.
10 Repeat steps 7 through 9 to install other drivers or applications.
11 When you have finished recovering applications or drivers, close the
Application Recovery program. Then click Start, click Turn Off Computer,
and click Restart to restart the PC.
WARNING: Do not skip this last step! You must restart the PC when
you are finished recovering applications or drivers.
using application recovery and system recovery
91