Labtron 707A User Manual page 8

7. Attach the cuff: Hold the area of the cuff where
the hose exits the cuff firmly against the inside
of the bare upper arm directly over the brachial
artery, and the bottom of the cuff approximately
one inch (2-3cm) above the elbow, as shown in the
third picture at right. Never place the cuff over
clothing. Pull the opposite end of the cuff snugly
around the arm and secure with the hook and loop
fastener. The cuff should be snug, but not too tight.
If one or two fingers can fit between the cuff and
the arm, the cuff is properly secured. If you are
unable to fit the cuff as described above, a smaller
or larger cuff should be used.
Labtron Digital Blood Pressure Monitor
1 inch
8