Troubleshooting; Error Indicators - Labtron 707A User Manual

TROUBLESHOOTING

Error indicators

Indication
Cause
Correction Ensure that bladder lies flat within cuff
Indication
Cause
Correction Turn monitor OFF then ON and measure again while remaining still
Indication
Cause
Correction Reapply cuff and measure again; if problem persists after cuff is
Batteries are exhausted. Replace with four new AAA alkaline batteries
Labtron Digital Blood Pressure Monitor
Cuff pressure reaches 330mmHg
Twisted bladder inside cuff
"Err" displays, cuff pressure releases, then "0 pressure" displays
Excessive arm movement or talking during measurement
Could not obtain pulse rate
Cuff was too loosely applied, extremely weak pulse, or arrhythmia
correctly positioned, seek medical attention immediately
14