MSI MS-7510 User Manual page 63

M S-7510 M ainboard
NB GTL Reference Voltage
This item allows you to set the NB GTL Reference voltage.
FSB Terminator Voltage
This item allows you to set the FSB Terminator voltage.
NB M emory Reference Voltage
This item allows you to set the NB Memory Reference voltag
SB Sleep Mode Voltage
This item allows you to set the SB Sleep Mode voltage.
PCIe Expander PLL Voltage
This item allows you to set the PCI Expander PLL voltage.
Spread Spectrum
This setting is used to enable or disable the Spread Spectrum feature. W hen
overclocking, always set it to [Disabled].
Important
1. If you do not have any EMI problem, leave the setting at [Disabled] for
optimal system stability and performance. But if you are plagued by EMI,
select the value of Spread Spectrum for EMI reduction.
2. The greater the Spread Spectrum value is, the greater the EMI is reduced,
and the system will become less stable. For the most suitable Spread
Spectrum value, please consult your local EMI regulation.
3. Remember to disable Spread Spectrum if you are overclocking because
even a slight jitter can introduce a temporary boost in clock speed which
may just cause your overclocked processor to lock up.
3-22