File Management - Scott MX930 User Manual

8) "Delete" – Delete selected image files in the image file name list.
9) "Up" – Move the selected image file up in the image file name list.
10) "Down" – Move the selected image file down in the image file name list.
AP Slide Show operation
1) Open the file "SlideShow" to view the configuration settings: Language, Panel Size
Type.
NOTE: You must set the panel size to be 160X128.
2) Click the command "Load Image" to load Images (*.jpg, *.bmp, *.gif)
3) Manage Image File Name List (Using the commands "Delete", "Up", "Down")
4) Select a mode of the slide show & Preview: Normal, Shutter (Left to Right), Shutter
Circle.
5) Click the command "Transform" to transform the images into SLS file.
NOTE: The detailed introduction to the slide show refers to instruction and installation CD →folder
"SlideShowMaker_V1.12.0" →"Slide_Show_Maker_AP" word format file.
A-B
You can repeat playing a section. Press the R/V button to select point A and press it again to select point
B. It will playback the section A-B repeatedly. Press the R/V button third time to cancel the A-B repeat
mode.
Play Rate
You can select the desired playback speed: 1.00X, 1.14X, 1.33X,1.60X, 0.50X, 0.67X, 0.80X).
NOTE: This function does not support WMA file format.

FILE MANAGEMENT

】buttons to select "FILE" and enter by pressing the
In the main menu, press the【
/
】buttons to select a file and press the
1. Use the【
/
2. To delete a file, press the M button to return to file list and then press the R/V button to enter "Delete"
(Top to Bottom),
button to confirm.
GB-12
and Panel
button.