Type 3 Battery Holder - HP COMPAQ DC5750 Service & Reference Manual

6.18.3 Type 3 Battery Holder

1. Pull back on the clip 1 that holds the battery in place, then remove the battery 2.
2. Insert the new battery and position the clip back in place.
3. Replace the computer access panel
4. Plug in the computer and turn on power.
5. Reset the date and time, your passwords, and any special system setups, using Computer
Setup. Refer to the Computer Setup (F10) Utility Guide.
Service Reference Guide, dc5750
Removal and Replacement Procedures— Microtower (MT) Chassis
(Section 6.3).
437963-001 6–37