HP p2289a Installation Manual page 9

HP nVIDIA GeForce2 MX (32 MB) Graphics Card Installation Guide
Overview of the Installation Procedure
Installing your HP nVIDIA GeForce2 MX
Graphics Card
WARNING
For your safety, never remove the computer's cover without first
removing the power cord, data cables and any connection to a
telecommunications network. Always replace the cover before
switching on again.
1 With the computer turned off, disconnect the power cord and
2 Disconnect the monitor cable from the old graphics card.
3 Depending on the computer model, you may need to remove
4 Slide the card out of the slot.
5 Slide your new HP nVIDIA GeForce2 MX Graphics Card into the
6 Secure the card to the chassis by either replacing the screws or
7 Replace the computer's cover.
WARNING
Inserting your HP nVIDIA GeForce2 MX graphics card into the
wrong slot could damage your graphics card.
6 English
any connection to a telecommunications network, then remove
the cover.
either the screws or the retaining bracket which secures the
graphic card in place.
slot and press firmly.
the retaining bracket.