Overview Of The Installation Procedure - HP p2289a Installation Manual

Overview of the Installation Procedure

Installing your HP nVIDIA GeForce2 MX Graphics Card is a three
step process. You need to:
•
•
•
NOTE
It is strongly recommended that you have no video driver installed
when you begin installing your new card.
Removing the Existing Video Driver Software
This section describes how to remove the existing driver software
on a computer running Windows 98, Windows 2000 or Windows NT
4.0. If you do not have any specific driver software installed (for
example you are using the standard VGA driver) you can proceed to
"Installing your HP nVIDIA GeForce2 MX Graphics Card" on page 6.
To remove an existing video driver:
1 In Windows click on Start
2 Double click on Add/Remove Programs.
3 Click on the Install/Uninstall tab
4 In the list of software which appears, select the old driver software
5 To confirm uninstallation of the driver click OK.
6 Follow the on-screen instructions.
7 When uninstallation is complete, restart your computer.
HP nVIDIA GeForce2 MX (32 MB) Graphics Card Installation Guide
Remove the existing video driver software (if necessary)
Install your HP nVIDIA GeForce2 MX graphics card
Install the new driver software.
(Windows 98 & Windows NT 4.0 only).
and click Add/Remove (Windows 98 & Windows NT 4.0)
For Windows 2000 click on Change/Remove.
Overview of the Installation Procedure
Settings Control Panel.
English 5