Table of Contents
Advertisement
HP nVIDIA GeForce2 MX (32 MB) Graphics Card Installation Guide
Overview of the Installation Procedure
Installing the New Driver Software
NOTE
For Windows NT 4.0 users only.
Once the driver is installed you should reboot your computer.
If your computer has a Pentium III processor and Windows NT 4.0
you are using Service Pack 4 or earlier you should install the Intel
SIMD driver available on the software CD-ROM.
Ensure that the Plug-and-Play Operating System setting of the
BIOS is disabled before installation.
Windows 98
1 Start the computer. Windows 98 automatically detects the new
2 In the Add New Hardware Wizard window, you will be prompted to
3 Click Next and insert the software CD-ROM disk in your drive.
4 Select Specify a Location, then click Browse.
5 Go to the win98 folder on the software CD-ROM and click OK.
6 Click OK in the Specify a Location window then click Next.
7 Click Next then click Finish.
8 Select Yes to restart your computer.
Windows NT4.0 (SP4+)
1 Start the computer.
2 Insert the software CD-ROM disk in your drive.
3 In the Windows Explorer, go to the winNT folder on the software
4 Select the setup.exe file and click OK.
5 Click Next.
6 Select nVIDIA GeForce2 MX and click OK.
7 Click Finish to restart your computer.
8 English
graphics card.
install a driver for your graphics card, click Next.
CD-ROM.
Advertisement
Table of Contents
