Using The Goto Function - Akai ACVDS702 User Manual

• Press the REPEAT button (42) again to cancel the function.
● To view a specific title of a DVD, press the TITLE button (46). Use the
arrow buttons to select the title.
● To select the audio language of a DVD, press the LANGUAGE button (43)
repeatedly until the desired language is set.
● To switch on the subtitles of a DVD, press the SUBTITLE button (21). To
switch off the subtitles of a DVD, press the SUBTITLE button (21) again.
● To select extra information of a DVD or CD (remaining time/passed
playtime/track number/chapter number), press the DISPLAY button (51).
● To select the camera angle, press the ANGLE button (47).
● To return to the main menu, press the MENU button (44).
i
● Normally, if an MP3 disc is loaded, the unit will take longer time to read
the initial data.
● A DVD that does not match the region code cannot be read by this
appliance.
● If a disc contains mixed content (e.g. MP3 and video files), the appliance
will only recognise, list and play one content type.
● The screen saver becomes active if no disc has been loaded for
3 minutes, or if the appliance has been in STOP mode for 3 minutes.

Using the GOTO function

The GOTO function can be used to select a specific starting point on a DVD
or CD.
● Press the GOTO button (24).
● Press the arrow buttons (27) to select an entry.
The possible entries for DVD are:
- Disc time
- Chapter
- Title
- Chapter time
- Title time
The possible entries for CD are:
- Track time
- Specific track
● Press the digit buttons to set a selection.
12