Table of Contents
Advertisement
● The screen saver becomes active if no disc has been loaded for 3 minutes,
or if the unit has been in STOP mode for 3 minutes.
Using the SEARCH function
The SEARCH function can be used to select a specific starting point on a
DVD or CD.
● Press the SEARCH button (33).
● Press the digit buttons (34) to select an entry.
The possible entries for DVD are:
-
Disc time
-
Chapter
-
Title
-
Chapter time
-
Title time
The possible entries for CD are:
-
Track time
-
Specific track
● Press the digit buttons to set a selection.
Using the PROGRAM function
● Press the PROGRAM button (43) to enter the PROGRAM function.
● Press the digit buttons (34) to select a desired track, and use the arrow
button down (38) to highlight the next entry.
● To confirm the selection and start the program, move the highlight to
"START" and press the ENTER button (39).
● To stop the progam, press the PROGRAM button (43) and press the
ENTER button (39).
Using the ZOOM function
This function can be used for zooming in and out on photos and DVDs.
The available zoom ratios are: 2x, 3x, 4x, 1/2x, 1/3x, 1/4x.
● Press the ZOOM button (44).
● Press the ZOOM button (44) again to set the correct size.
● Press the arrow buttons (38) to move through the picture.
Using the MP3/MPEG4/WMA playback function
● Insert an MP3/MPEG4/WMA disc. A content menu will display on the TV
screen.
● Press the up/down arrow buttons (38) to select a folder or a file.
14
Advertisement
Table of Contents
