Contents Miracast™ Wireless Display User guide........3 Setting up the Miracast™ Wireless Display........4 Hardware overview................4 Turning on and connecting the Miracast™ Wireless Display to a HDTV....................4 Sharing your content using screen mirroring........5 Connecting when the dongle is placed out of reach.....7 Starting screen mirroring when the dongle is out of reach....7 Resetting the Miracast™...
Setting up the Miracast™ Wireless Display Hardware overview Micro USB port Reset button HDMI port Notification light Connect button Turning on and connecting the Miracast™ Wireless Display to a HDTV To turn on the Miracast™ Wireless Display Make sure to use the charger that comes with the dongle. Plug one end of the charger cable into the charger.
Plug one end of the HDMI cable into the HDMI port of the HDTV. Plug the other end of the HDMI cable into the HDMI port of the Miracast™ Wireless Display. A Sony™ logo appears on the HDTV screen, indicating that the connection is successful.
Page 6
To launch screen mirroring using NFC Make sure your Miracast™ Wireless Display is powered on, connected to the HDTV, and standing by. Android™ device: Make sure the NFC function is turned on and that the screen is activated and unlocked. Place your Android™...
Connecting when the dongle is placed out of reach Most users connect to the Miracast™ Wireless Display using the Connect button on the dongle. This is the default connection mode. However, if the dongle is not placed within reach, for example, if it’s connected to a projector and fixed to a ceiling, the dongle must be set to remote connection mode.
Resetting the Miracast™ Wireless Display Reset the Miracast™ Wireless Display if it behaves unexpectedly. When you reset the dongle, all information about paired Android™ devices is deleted. To reset the Miracast™ Wireless Display • Press and hold down the Reset button until the notification light turns off briefly and then flashes white.
Page 10
Industry Canada Statement This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.