Samsung SND-5011 User Manual page 64

setup screen
802.1x
When connecting network, you can choose whether using 802.1x protocol, and then install
the certification.
1. From the Setup menu, select the
<network (
2. Click <802.1x>.
3. Set the <ieee 802.1x Setting(eapoL
using eap-tLS)>.
• Enable IEEE 802.1x : Specify the
use of the 802.1x protocol.
• EAPOL Version : Select version 1 or
2.
• ID : Enter the EAPOL ID.
• Password : Enter the EAPOL password.
If the connected network device does not support the 802.1x protocol, the protocol will not
`
J
operate properly even if you set it.
4. Install/remove the certificate.
• CA Certificates : Select a public certificate that contains the public key.
• Client Certificate : Select a public certificate that contains the client certificate
key.
• Client Private Key : Select a public certificate that contains the client private key.
5. When done, click [apply (
to install/remove 802.1x related certificates
1. Press the [Browse (
install.
2. If no certificate is installed, you will see "Not Available" appearing next to the
selected item.
3. Press the [install (
next to the item.
4. Press the [Delete (
64_ setup screen
)> tab.
)].
)] button for each item and select a certificate to
)] button to start installation with a message of "Installed"
)] button to remove the certificate.