Samsung SND-5011 User Manual page 52

setup screen
In AWC mode, click the [AWC Set] button if you want to keep the white balance level of the
`
M
current image.
The white balancing may not work properly in the following conditions:
`
J
If this is the case, switch to AWC mode.
-
If the surrounding condition of the object is out of the temperature correction range
ex) Clear sky, sunset
-
If the surrounding of the object is dark
-
If the focus of the camera directly faces the florescent lighting or if the camera is installed in a
place of variable illumination, the white balancing operation may be unstable.
BLc Setup
You can specify a desired area on the video manually and set the area to be displayed
more clearly.
1. Select <Backlight>.
2. Set <mode> to <BLc>.
3. Set <BLc level>.
You can change the level to adjust the
brightness of the monitoring area.
4. Set the <top, Bottom, Left, right>
levels to specify the target area.
exposure Setup (SnD-5011/SnD-7011)
You can adjust the exposure level of the camera.
1. Select <exposure>.
2. Select each item and set it properly.
• Brightness : Adjust the screen
brightness.
• Shutter mode : Adjust the electronic
shutter of the camera.
- Auto : Adjust the shutter speed
automatically according to the
ambient brightness.
- Manual : Adjust the shutter speed of the camera manually.
- A.FLK (Anti flicker) : Select this feature if you encounter a flickering screen due
to a frequency mismatch with the ambient lighting.
52_ setup screen