Control Settings - GE GSD1000G Owner's Manual

Control Settings

Cycles
HEAVY WASH For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday dishes may be included.
This cycle will not remove burned-on foods.
NORMAL WASH For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Many dishes have lighter
soil than normal. Choosing a cycle other than NORMAL WASH will save energy and water.
SHORT WASH For quickly washing loads of everyday dishes with medium soils that have not dried on, such as loads
consisting mostly of glasses.
RINSE ONLY For rinsing partial loads that will be washed later. Do not use detergent.
PLATE WARMER For warming clean dishes and serving plates. This cycle will take approximately 30 minutes.
HOT START Preheats wash water to the correct temperature.
Energy Options
HEATED DRY ON Turns the heating element on for fast drying. This option will extend the time of your wash cycle.
Available on all wash cycles except RINSE ONLY. Adds approx. 32 minutes to the cycle.
HEATED DRY OFF Turns HEATED DRY off. Dishes air dry naturally and energy is saved.
Start
Slowly turn the Dial to the START or ON position, or the selected cycle. Don't turn it past the START, ON
or cycle position, or you could accidentally miss a rinse.
There is a time delay between start-up and water fill so you will not hear any wash action right away.
s
Latch the door to begin the cycle.
Cycle Chart
Model Cycle
GSD1000G, Hot Start Option
GSD1100G Heavy Wash
Normal Wash
Rinse Only
Drying/Plate Warmer
GSD1200G Hot Start Option
Heavy Wash
Normal Wash
Short Wash
Rinse Only
Drying/Plate Warmer
GSD1900J, Hot Start Option
GSD2000J, Heavy Wash
GSD2001J Normal Wash
Short Wash
Rinse Only
Drying/Plate Warmer
Water Usage (gal.) Cycle Time (min.)
13.3
9.9
8.4
4.1
0.0
13.3
9.9
8.4
6.9
4.1
0.0
12.6
9.2
6.5
5.2
3.9
0.0
www.GEAppliances.com
97
71
66
13
30
97
71
66
62
13
30
97
71
62
58
13
27
5