Adjusting Image Settings; For Hp Vga Webcam For Notebook Pcs - HP VGA Webcam for Notebook PCs User Manual

Adjusting Image Settings

The Image settings options vary slightly based on your webcam model. The sections that follow describe the Image
settings for each webcam model.

For HP VGA Webcam for Notebook PCs

1 In ArcSoft VideoImpression or HP Photosmart Essential,
click Settings.
2 Click the Image tab.
3 Under White balance, select the Auto check box to let
the software automatically detect color levels, or uncheck
the box and drag the sliders to manually adjust the color
levels.
4 Under Exposure, select the Auto check box to let the
software automatically detect the optimum shutter speed,
or uncheck the box and drag the slider to manually
adjust the speed.
5 Under USB Bandwidth, select Auto to let the software
automatically detect the optimum speed. If you need to
share USB resources between accessories, select a
specific speed limit for the webcam resources.
6 Under Mirror, indicate whether you want to rotate the
image by checking the Horizontal and Vertical
boxes.
7 Under Status LED, select On to turn on the webcam LED,
or select Off to turn it off.
8 Under Flicker, select Outdoor if you're outside or using all natural lighting. Select 50Hz if you're outside
North America, or select 60Hz if you're inside North America.
9 (Optional) Click Save As to store your settings and assign them a name, so you can use them again later.
10 Click OK.
NOTE: To use previously saved settings, select Load and then select the name you assigned to the settings. To
restore the factory settings, select Default.
HP Webcam User's Guide
7