Sony DSR-1800 Operating Instructions Manual page 57

3
Press the k button.
This displays the items in the level 1 of the auto mode
execution menu.
AUTO FUNCTION MENU
SDTI DUBBING
i.LINK DUBBING
TC INSERT
Monitor screen
4
Press the k button to display the menu level 2 for the
item "SDTI DUBBING," and select the data to be
dubbed with the j button.
Example: Selecting "A/V/TC/CM"
AUTO FUNCTION MENU
SDTI DUBBING
A/V
A/V/TC
A/V/TC/CM
Monitor screen
5
Press the k button.
The following message appears.
SDTI DUBBING
(A/V/TC/CM)
INSERT RECORD TAPE IN
THIS VTR AND SOURCE
TAPE IN THE PLAYER VTR.
ABORT:MENU KEY
Monitor screen
SDTI DUB
Time counter display
>A/V/TC/CM
Time counter display
Set tape!
Time counter display
6
Insert the source tape in the player, and the recording
tape in this unit.
A message to confirm the dubbing operation appears.
SDTI DUBBING
(A/V/TC/CM)
START QSDI DUBBING?
START:YES KEY
ABORT:MENU KEY
Monitor screen
To cancel the dubbing operation
Press the MENU button.
7
Press the SET (YES) button.
The tape is automatically wound back to the
beginning, and dubbing starts.
SDTI DUBBING
(A/V/TC/CM)
EXECUTING.
TCR 00:00:00:00
UBR 00:00:00:00
ABORT:MENU KEY
Monitor screen
To end the dubbing operation while it is in progress
Press the STOP button.
When the dubbing is completed, message
"COMPLETED" appears on the monitor screen and
"Completed" in the time counter display.
The source tape and recording tape are both
automatically rewound to the beginning, and the
cassettes ejected. When the cassette is ejected, this unit
returns to the state in step 5.
8
To continue by dubbing another tape, repeat steps 6
and 7.
9
When the dubbing is completed, press the MENU
button to exit the menu.
Digitally Dubbing Signals in DVCAM Format
Start dub?
Time counter display
Executing
Time counter display
57