Overload. When the number of private IP addresses is greater than the number of public IP addresses,
private IP addresses must share public IP addresses. The following parameters are used:
Start Private IP address- End Private IP Address: For example, 192.168.1.3- 192.168.1.22
Start Global IP Address- End Global IP Address: For example, 10.1.1.3-10.1.1.10
STEP 1: Fill out the above parameters in the relevant fields.
Start Private IP address: For example, 192.168.1.3
End Private IP Address: For example, 192.168.1.22
Start Global IP Address: For example, 10.1.1.3
End Global IP Address: For example, 10.1.1.10
STEP 2: Select Overload and click on the Add button.
1740-A2-GB20-10
September 2004
1740 SHDSL 2/4-Wire Router User's Guide
55