Registering Fingerprints - HP V6604AU User Manual

Registering fingerprints

A fingerprint reader allows you to log on to Windows using a fingerprint registered in VeriSoft Access
Manager, instead of using a Windows password.
Whether you are using an HP computer with an integrated fingerprint reader or an optional external
fingerprint reader, you must set up the fingerprint reader before you can use a fingerprint logon to
Windows.
NOTE:
computer before performing the steps below.
1. In Windows, double-click the VeriSoft Access Manager icon in the notification area of the taskbar.
2. On the "My Identity" page, click Log On, located in the upper-left corner of the page.
The VeriSoft Access Manager Logon Wizard opens.
3. On the "Introduce Yourself" page, enter the user's Windows password, if one has been established,
and then click Next.
4. On the "Services and Applications" page, click I want to, and then click Register Fingerprints.
NOTE:
fingers.
5. When the VeriSoft Access Manager Registration Wizard opens, click Next, and then slowly swipe
your finger across the sensor.
NOTE:
change the default by clicking the finger you want to register first, on either the left hand or
the right hand. When you click a finger, it will be outlined to show it has been selected.
6. Continue swiping the same finger over the fingerprint sensor until the finger on the screen turns
green.
NOTE:
necessary to register a fingerprint.
NOTE:
highlighted finger on the screen and then click Start Over.
7. Click a different finger on the screen to register, and then repeat steps 5 and 6.
NOTE:
displayed. Click OK to continue.
8. After you have registered at least 2 fingers, click Finish.
9. To set up the fingerprint reader for a different Windows user, log on to Windows as that user and
then repeat steps 1 through 8.
12 Chapter 7 Using the fingerprint reader (select models only)
If you are using an optional external fingerprint reader, connect the reader to the
By default, VeriSoft Access Manager requires registration of at least 2 different
The right index finger is the default finger for enrolling the first fingerprint. You can
The progress indicator advances after each finger swipe. Multiple swipes are
If you need to start over during the fingerprint registration process, right-click the
If you click Finish before registering at least 2 fingers, an error message is
ENWW