Managing An Administrator Password; Entering An Administrator Password; Power-On Password; Managing A Power-On Password - HP V6604AU User Manual

Managing an administrator password

To set, change, or delete this password:
1. Open Setup Utility by turning on or restarting the computer, and then pressing
message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select Security > Administrator Password, and then press enter.
●
To set an administrator password, type your password in the Enter New Password and
Confirm New Password fields, and then press enter.
●
To change an administrator password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press enter.
●
To delete an administrator password, type your current password in the Enter Password field,
and then press
3. To save your preferences and exit Setup Utility, press f10, and then follow the instructions on the
screen.
Your preferences go into effect when the computer restarts.

Entering an administrator password

At the Enter Password prompt, type your administrator password (using the same kind of keys you
used to set the password), and then press enter. After 3 unsuccessful attempts to enter the administrator
password, you must restart the computer and try again.

Power-on password

Your power-on password prevents unauthorized use of the computer. After this password is set, it must
be entered each time you turn on or restart the computer, or exit Hibernation. A power-on password is
not displayed as it is set, entered, changed, or deleted.

Managing a power-on password

To set, change, or delete this password:
1. Open Setup Utility by turning on or restarting the computer, and then pressing
message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select Security > Power-On Password, and then press enter.
●
To set a power-on password, type your password in the Enter New Password and Confirm
New Password fields, and then press enter.
●
To change a power-on password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press enter.
●
To delete a power-on password, type your current password in the Enter Current
Password field, and then press
3. To save your preferences and exit Setup Utility, press f10, and then follow the instructions on the
screen.
4 Chapter 2 Using passwords
enter 4 times.
enter 4 times.
f10 while the setup
f10 while the setup
ENWW