Technical Reference - Canon i80 Reference Manual

3. TECHNICAL REFERENCE

3-1. FAQ (Specific Problems and Solutions)
(1) New items specific to i80 / PIXUS 80i
No. * Function Symptom
1. B Status Monitor does not
display printer status
(remaining ink amount,
printer error, etc.).
2. C "This document failed to
print," etc. is displayed.
* Occurrence level:
A: The symptom is likely to occur frequently.
B: The symptom may occur under certain conditions, but likeliness is assumed very low in practical usage.
C: The symptom is unlikely to be recognized by the user, and no practical issues are assumed.
Condition
- When printing is attempted via Because the printer supports
infrared communication under uni-directional communication in
Windows 2000 / XP (the problem the specified conditions.
can occur also in the i70 / PIXUS
50i).
- When printing via Bluetooth
connection is attempted (only
with Microsoft Bluetooth stack, as
of January, 2004).
- When printing is attempted via a. As the printer supports
infrared communication under
Windows 2000 / XP (the problem
can occur also in the i70 / PIXUS
50i).
- When printing via Bluetooth
connection is attempted (only
with Microsoft Bluetooth stack, as
of January, 2004).
b. Because the HCRP print
Cause
- With regard to printer errors, identify
the error by LED indication.
- Regarding remaining ink amount, no
detection is available.
a. By LED indication, check the printer
uni-directional communication status.
in the specified conditions, the - Turned off: Turn the printer on.
message will be displayed - Blinks in orange: Clear the error.
unless the printer is ready for - Blinks in green: If other print
data reception. job(s) or cleaning is being
The printer is NOT ready for performed, wait until the operation
data reception: completes. After completion of the
- during power-off. operation, the message will
- when a printer error occurs. disappear and printing will start
- while performing another print automatically.
job. If the print head cover is open,
- during cleaning. close it.
- when the print head cover is b. In Control Panel, select Printers and
open. Other Hardware, and Wireless Link.
In the Bluetooth tab, click the i80 /
service is not enabled. PIXUS 80i printer icon, and
Properties. In the Services tab, check
the Printing (HCRP) option, and click
OK.
( 8 / 12)
Possible call or
Solution
complaint
- The remaining ink
amount is not detected
in infrared or Bluetooth
printing.
- "This document failed
to print" is displayed.