Table of Contents
Advertisement
Step 5
Locate an available PCI expansion slot (usu-
ally white/beige in color). This will be in the
area of your computer where other cards that
look similar to the Dual Link card
are installed.
Step 6
Visually confirm that the Dual Link PCI
Card will fit into the available slot you
have chosen.
Step 7
If necessary, remove the knockout on the
back of your computer which corresponds
to the PCI slot you have confirmed as your
selection. If there is a screw, place it in a safe
place as you will be using it to attach the Dual
Link Card.
Step 8
Push the Dual Link PCI Card firmly into the
PCI slot. Apply pressure as needed (but do
not force the card) until the edge connector is
completely in the slot.
Dual Link 9
Advertisement
Table of Contents
