Table of Contents
Advertisement
Hardware Installation
Step 1
Power down your computer and disconnect
the power cord. Be sure to remove the power
cord completely from your computer as
shown in the picture to the left.
Step 2
Remove the screws that hold the panel/shell
of your computer (located on the back of the
computer). Be sure to put the screws you
removed in a safe place, as you will need
them again when replacing the shell on your
computer.
Step 3
Carefully remove the panel/shell from your
computer.
Step 4
With the power cable disconnected from your
computer, touch the metal part of the case to
ground yourself. This will discharge any static
electricity from your body which can damage
your computer.
Dual Link 8
Advertisement
Table of Contents
