Edit Avoid Area - Acura 2007 MDX Navigation Manual

System Set-up

Edit Avoid Area

This function allows you to select areas
you wish to avoid when calculating a
route to your destination. You can select
up to 5 areas to avoid. You may wish to
set up an "avoid area" to route around
long term road construction, closures, or
any area you wish to avoid. If you enter
a route that takes you through or into an
"avoid area," a pop-up box will warn
you that your route takes you into one of
these areas. However, you can still
choose destinations in an avoided area.
When you select Edit Avoid Area, the
following list screen is displayed.
96 Navigation System
You can select NEW AREA, or select
one of your existing areas to modify. If
you choose NEW AREA, the following
screen is displayed:
Say or select Edit Name, and use the
Interface Dial to enter the name on the
Enter avoid area name screen (19
characters max). Say or select DONE to
return to the previous screen.
Say or select Edit Area, to create the
area to be avoided. The following screen
appears.
Either select Address or Map Input
on the Enter avoid area by screen.
Each choice provides a slightly different
way to locate the approximate map
display for drawing the area you wish to
avoid.