Handsfreelink; Remote Keyless Entry Setting - Acura 2007 MDX Navigation Manual

Getting Started
If you press the CANCEL button, the
message will be displayed the next time
you start the vehicle.
NOTE:
The system will display the current
message and any older or previously
unread messages, with the newest
message listed first.
18 Navigation System

HandsFreeLink™

If you have a Bluetooth compatible cell
phone that is "paired and turned on,"
then CALL on the Calculate route to
screen is enabled.
When you select CALL, the system
dials the number shown on the screen. If
CALL is not available (grayed out), and
your phone is "paired," then make sure
the HFL is not in use; press the HFL
BACK button.
For more information on
HandsFreeLink™, see the vehicle
Owner's manual and the official web
site (www.handsfreelink.com).
Remote Keyless Entry
Setting
When you unlock the door and enter the
vehicle, the Multi-Information Display
(MID) in the gauge assembly welcomes
you with one of the following displays:
"Welcome Driver 1," "Welcome Driver
2," or just "Welcome." The vehicle
"senses" the driver number, based on
which Remote Keyless Entry is used to
unlock the vehicle.
NOTE:
• Remote transmitters 1 and 2 are
respectively identified on the back
with MEMORY 1 and MEMORY 2
labels.
• If only "Welcome" is displayed, then
all Setup settings revert to factory
defaults, and all personal data (such
as Address Book or Calendar) are not
available.