Ystem Ndicator; Handset; Emory Ull; Answering System - GE 27959 User Manual

1. Press the format/answerer button.
2. Press the 2 key (play/stop).
3. When you are finished listening to your messages, press format/
answerer again to quit, or you may listen to the voice menu at any time
by pressing 7.
A S
NSWERING YSTEM
The answering system is active when the answerer indicator is illuminated.
S C
CREENING ALLS FROM THE
You may use the cordless handset to remotely screen calls.
1. Make sure the phone stops ringing and the answering system answers
the call.
2. Press the handset answerer/format button to gain access to the

answering system.

3. Listen to the caller leaving a message.
4. Press the TALK/callback button to speak to the caller, or press the
answer/format button to stop screening the call.
M F
EMORY ULL
When the answering system's memory is full, the system answers after 10
rings, beeps, and waits for you to enter the 3-digit security code. You have
10 seconds to enter the security code before the phone hangs up.
You should erase some of the messages in order for the system to record
incoming messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access
the answering system, enter your 3-digit security code after you hear the beep.
A
CCESSING THE
You can access your answering system from any touch-tone phone by
entering your 3-digit security code after you hear the outgoing
announcement.
1. Dial the phone number the answering system is connected to.
I
NDICATOR
H
A S
NSWERING YSTEM FROM
ANDSET
A
NOTHER
L
OCATION
37