Fcc Notice - l-com IES-2205 User Manual

NOTICE
L-com Global Connectivity reserves the right to make changes in specifications and other information contained in this
document and its web site without prior notice. The reader should in all cases consult L-com Global Connectivity to determine
whether any such changes have been made. The hardware, firmware, or software described in this document is subject to
change without notice.
IN NO EVENT SHALL L-COM GLOBAL CONNECTIVITY BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL,
OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST PROFITS)
ARISING OUT OF OR RELATED TO THIS DOCUMENT, WEB SITE, OR THE INFORMATION CONTAINED IN
THEM, EVEN IF L-COM GLOBAL CONNECTIVITY HAS BEEN ADVISED OF, KNEW OF, OR SHOULD HAVE KNOWN
OF, THE POSSIBILITY OF SUCH DAMAGES.
L-com Global Connectivity, Inc.
45 Beechwood Drive
North Andover, MA
01845
2011 L-com Global Connectivity, Inc. All rights reserved.

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment uses, generates, and can radiate radio frequency
energy and if not installed in accordance with the operator's manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause interference in which case the user
will be required to correct the interference at their own expense.
WARNING: Changes or modifications made to this device which are not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
IES Series User Manual V. 1.0 ii