Related Manuals for l-com IES Series
Summary of Contents for l-com IES Series
- Page 1 IES Series Industrial Ethernet Switch User Guide Models: IES-MCG-SFP, IES-2205, IES-2206, IES-2208, IES-2210, IES-2212, IES-2216 & IES-2220 June, 2019 Version: 2.0 IES Series User Manual V. 2.0...
- Page 2 L-com reserves the right to make changes in specifications and other information contained in this document and its web site without prior notice. The reader should in all cases consult L-com Global Connectivity to determine whether any such changes have been made. The hardware, firmware, or software described in this document is subject to change without notice.
- Page 3 Some fiber switches use laser powered optical transceivers that can cause permanent eye damage if directly viewed with the naked eye or with optical instruments. DO NOT view the optical fiber ports when the product is in use. IES Series User Manual V. 2.0...
-
Page 4: Table Of Contents
Chapter 2: Hardware Functionality 2.1 Main Functions 2.1.1 Power Input Interface and Installation 2.1.2 Relay Option 2.1.3 LED Indicator Lights Chapter 3: Hardware Installation 3.1 DIN-rail Installation Chapter 4: Support and Warranty 4.1 Support 4.2 Warranty IES Series User Manual V. 2.0... -
Page 5: Chapter 1 Introduction
DIN rail mountable using standard 35mm DIN rail and require 24V DC power for operation. The IES series is perfect for designing and building new industrial IP networks or adding to existing Industrial LAN infrastructure. These unmanaged switches utilize standards based Ethernet and are compatible with all other IEEE 803.3/802.3u/803.3ab compliant devices such as PLC’s and media converters... -
Page 6: System Parameters
Gigabit FX port sold separately) parameters Baud rate: 1000Base-FX (Gigabit) Input Voltage：24V DC Input expend: IES-2205 series, IES-2206 series, IES-2208 series <5W Power parameters IES-2210 series, IES-2212 series, IES-2216 series, IES-2220 series <15W Voltage passing：Inside IES Series User Manual V. 2.0... - Page 7 Temperature Ambient Relative Humidity：5～95%(non-condensing) EN61000-4-2（ESD）, Level 4 EN61000-4-3（RS）, Level 4 EN61000-4-4（EFT）, Level 4 Industry Standards EN61000-4-5（Surge）, Level 4 EN61000-4-6（CS）, Level 4 EN61000-4-8,Level 5 Impact: IEC60068–2-27 Falling: IEC60068-2-32 Industry Standards Shock: IEC60068-2-6 Other Certifications: CE/FCC/RoHS IES Series User Manual V. 2.0...
-
Page 8: Chapter 2 Hardware Functionality
Fig. 2-3 When using only one power supply make sure to connect the supply to the V1+ and V1- terminals. Power conductor diameter should be less than 1.5mm to fit the screw terminals. IES Series User Manual V. 2.0... -
Page 9: Relay Option
If a redundant DC power configuration is to be used connect the second set of conductors to V2+ and V2- respectively. Grounding Be sure to properly ground the IES switch. Failure to properly ground the switch may result in damage or destruction of the switch or attached devices. IES Series User Manual V. 2.0... -
Page 10: Led Indicator Lights
2.1.3 LED indication lights The front panels of the IES series Industrial Ethernet Switches feature LED indicators which aid in troubleshooting and viewing the system status at a glance. See Figure 2-5. Lights Status Interface LED Status Power is being supplied to the switch... -
Page 11: Chapter 3 Hardware Installation
• Insert DIN-Rail into the DIN-Rail slot of the IES Switch and rotate Downward, compressing the internal spring, as shown in Figure 1 below. • The IES Switch should be locked firmly into place onto the DIN-Rail as shown in Figure 2 below. Fig. 3-1 IES Series User Manual V. 2.0... -
Page 12: Chapter 4 Support And Warranty
Chapter 4 Support and Warranty 4.1 Support Should you require support for your IES switch please contact the L-com Product Support team via one of the following methods. __________________________________________________________________________________________ Phone 1-978-682-6936 Toll Free 1-800-341-5266 E-mail support@l-com.com 4.2 Warranty We warrant these IES Industrial Ethernet Switches for a period of three years from time of purchase. These products are warranted against defects in workmanship or materials under normal use.