Hints; Cording Foot (3 Cord Guide); Use; Preparing To Sew - Baby Lock ellageo BLL2 Instruction And Reference Manual

Hide thumbs Also See for ellageo BLL2:
Table of Contents

Advertisement

Available languages

Available languages

e
After sewing 2 to 3 cm of the fabric, release
the thread and guide the fabric from the front
of the presser foot with your left hand. Keep a
uniform amount of fabric wrapped around the
presser foot curl until the seam is completed.

■ Hints

• If too little fabric is wrapped around the curl
and a threefold seam is not being sewn:
Pull the fabric held in your right hand to the left in
order to increase the amount of fabric wrapped in
the presser foot curl. At the same time, carefully
guide the fabric to the right with your left hand.
• If too much fabric is wrapped around the curl
and a wide threefold seam is being sewn:
Pull the fabric held in your right hand to the right in
order to decrease the amount of fabric wrapped in
the presser foot curl. At the same time, carefully
guide the extra fabric to the left with your left hand.

Cording foot (3 cord guide)

■ Use

Embellish clothing and household linens with
decorative threads.
Cording foot (3 cord guide)

■ Preparing to sew

Remove presser foot and attach snap-on cording
foot.
• Suggested Stitches
Zigzag
Stretch Zigzag
• Zigzag stitch width
Triple Cording stretch
Select dotted zigzag stitch and sew
at a maximum stitch width of 5 mm.
Single Cording
The zigzag stitch may be positioned
in the center or right guide. Verify
position of stitch and determine the
appropriate guide to be followed. Set
stitch width slightly greater than
width of cording.
• Stitch Length
Select desired stitch length. Remember that the
results will vary based on the stitch length you have
selected.
Decorative Satin Stitch
13

Advertisement

Table of Contents
loading

Table of Contents