Advertisement
7、Adjusting the Camera Direction
Camera body moves in three ways: pan, tilt and rotate. Adjust the
direction so that the lens is pointing at the target.
8、Use the lever to adjust the view angle and focus.
Focus adjustment lever
View angle adjustment lever
9、To attach the body cover. Turn the dome cover to adjust the lens to the
opening window.
Ⅶ
Dimension Outline
7
128
Ⅹ
10、Connecting Low Voltage Power & Video Signal
The wiring harness have a BNC connector to accept video signal ,
the other connectors to accept the low voltage power. For mounting
directly to a wall or ceiling, run power and video lines to the target location.
5
SELF-CHECK POI NTS
Rotate 90°
BEFORE CON SULTING AFTER-SALES SERVI CES
Pan360°
CONDITIONS
Screen not turned on
Screen not clear
or is spread
91
www.vantage.eu.com
VIDEO
12VDC
CHECKING POI NTS
*Make sure whether power is connected correctly.
*Check if the cable is connected correctly.
*If dust is seen through the mon itor screen after
fixing lens, dissemble the lens and clear off the
dust on the surface of CCD with blower or soft cloth.
Ⅷ
6
SPECIFICATIONS
ITEM
VAEDR460VFV
Signal System
PAL / NTSC system
1/3" Sony CCD
Image Sensor
Effective Pixels
PAL:500(H)×582(V) NTSC:510(H)×494(V)
Resolution
460Lines
Lens
Varifocal lens, f=4~9mm
Minimum I llumination
0.3Lux/F1.2
S/N Ratio
More than 48dB
0.45
Gamma correction
Output Signal
1.0Vp-p
Automatic
AGC
Shutter Speed
1/50-1/100,000SEC(PAL),1/60~1/100,000(NTSC)
BLC
Automatic
White Balance
Automatic
Sync Mode
INT
Consumed Current
150mA (MAX)
Power Supply
DC12V
-10℃~+50℃ RH95%MAX (non-condensing)
Operating Temperature
φ128mm×91mm
Dimension
300g
Weight
Compliance
PS Cable E321484UL,CE,FCC
All data and specifications subject to change without notice.
Ⅸ
Advertisement
