Vantage Hearth VAEBLIR10FV User Manual

IR Bullet Camera
User Manual
VAEBLIR10FV

Features

● 1/3" SONY CCD sensor
.
● Latest DSP controls for BLC, white balance, and gain control.
●
Horizontal resolution of 420 TVL .
● Built-in Fixed Lens, f=3.6mm.
●
Integrated efficient IR LED that allows for high resolution and full motion
video capture even in darkness. IR lighting distance 10m.
● Built-in Photo-sensor for automatic operation of IR LED array.
● Elegance in design for both mechanical and camera elements.
● Aluminum sealed enclosure, waterproof.
Ver 1.0
Ⅰ
Caution
● Do not disassemble or modify the camera to avoid possible fire, electric
shock or other hazard. Please refer repairs or service to a qualified
service technician.
● Take care when installing the camera. Avoid scratching the front glass window.
● Avoid Shock, Vibration. Do not install the camera on an unstable surface. It
can be damaged by improper use or storage.
● Never point the camera towards direct sunlight or other sources of bright
light in order to avoid a dimmer image due to too much backlighting.
● Use the came ra within the published temp erature, humidity, and electrical ranges.
● Provide ample slack in the video and power cables once the camera is
installed in its final position.
● Request for service by a qualified technician if the camera malfunctions or
generates excessive amounts of heat.

Accessories list

Unpack the camera carefully and make sure that all accessories are included for
the installation.
No. Items
Sunshield housing
1
2 Screws
Camera
3
Mounting bracket
4
Manual
5
Ⅱ

Structure

Sunshield housing
Mounting bracket

Installation

1 Mount the camera bracket to the wall or other stable surface using the supplied
screws.
Quantity
2 Mount the camera as indicated in the drawing.
1 PC
3 Adjust the cameras orientation by moving the bracket handle as shown.
4 Power the camera from a source of 12VDC power.
1 bag
1 PC
5. With the camera powered, connect first the camera's video output to a local
1 PC
monitor to adjust for the perfect viewing angle, secure the camera, then
1 copy
disconnect the service monitor and connect the camera to the video coax
feeding the CCTV monitor.
Camera
Video/ BNC Female
12VDC
Video/Power
Ⅲ