Casio PCR-T500 User Manual page 99

Advanced programmings and registrations
Error code Message
E050 DETAIL memory full
E051 CHK/TBL No. is occupied
E053 CHK/TBL No. is not opened
E075 Negative balance cannot be
fi nalized
E101 PLU maintenance fi le full. Press
<#2> to exit
E103 PLU Code is not exist. Input the
PLU Code
E105 PLU fi le full
E106 Item exists in the PLU FILE
E112 Close the journal platen arm
E114 Close the receipt platen arm
E139 Negative balance is not allowed Attempt to register <–> or <CPN>
E146 Arrangement fi le full
E200 Insert SD
E201 Illegal Format
E202 File not found
E205 File already exist.
Meaning
Check tracking detail memory full.
Attempt to made use <New Check>
to open a new check using a
number that is already used for an
existing check in check tracking
memory.
Attempt made to use <Old Check>
reopen a new check using a number
that is not used for an existing check
in check tracking memory.
Attempt to fi nalize a transaction
when balance is less than or equal
to zero.
Scanning PLU direct maintenance/
batch maintenance fi le becomes
full.
PLU code is not existed in the fi le.
Scanning PLU fi le full
The designated item has already
existed in the scanning PLU fi le.
The journal platen arm is opened.
The receipt platen arm is opened.
when the balance becomes nega-
tive.
Arrangement fi le is full.
SD is set.
Illegally formatted SD
The designated fi le is not found in
the SD.
Can not write, because designated
fi le has already been in the SD.
Action
Finalize and close the check num-
ber currently used.
Finalize and close the check that is
currently under the number that you
want to use or use a different check
number.
Use the correct check number (if
you want to reopen a check that
already exists in check tracking
memory) or use <New Check> to
open a new check.
Register item(s) until the balance
becomes positive amount.
Terminate the maintenance.
Enter proper PLU code.
Modify the designated item.
Close the journal platen arm.
Close the receipt platen arm.
Enter proper minus/coupon amount.
Set the arrangement properly.
Set SD.
Format the SD.
Enter proper fi le name.
Check the operation and retry.
E-99