Casio PCR-T500 User Manual page 82

Advanced programmings and registrations
Programming further clerk functions
This section explains how you can set further programming for clerks such as
setting the register in training mode or setting commission rates given to clerks. In
the training mode, the register operates normally but the results will not be stored
in the memory. You can use this feature for getting to know the operations of the
cash register for yourself or for newly hired clerks.
Step
1
Turn the Mode switch to PGM position and select [System
F
Setting] then press
2
3
Enter and press o
programming mode.
3
Enter 2 -digit clerk number followed by 07. The "07" is the
identifi cation code for further program of clerks. Then press
o key. The example on the right is for programming to clerk
number 10.
4
Referring the following tables, input the set code you wish
to program and press o
is for setting a commission rate.
5
Enter the program code and press
ample on the right is for setting 8.5% to commission rate 1
and 5% to commission 2.
6
If you wish to set the same program to the next clerk
number, perform the step 5 again. When you set to another
clerk (not next clerk number), repeat steps 3 through 5.
5
Press o key to complete the settings.
Set code 67 (Training mode)
Training mode
Must be "00000"
Example 1: To set the clerk number 15 as a clerk being trained.
3o1507o100000Fo
Press
Set code 68 (Commission rates)
Commission rate 1 (integer)
Commission rate 1 (decimal)
Commission rate 2 (integer)
Commission rate 2 (decimal)
E-82
key.
key to set the register in the
key. The example on the right
F
key. The ex-
Description
Description
Operation
>▪▪▪▪▪>F
3o
1007o
(Clerk no.)
68o
(set code)
08500500F
(program code)
o
Selection Program code
No = 0
Yes = 1
ººººº
D5 D4 D3 D2 D1
Selection Program code
00 to 99
00 to 99
00 to 99
00 to 99
B
D6
BB
D8 D7
BB
D6 D5
BB
D4 D3
BB
D2 D1